National Journals

Permanent URI for this collectionhttps://dspace.psgrkcw.com/handle/123456789/2989

Browse

Search Results

Now showing 1 - 10 of 32
  • Item
    Biotechnology - Trial Version
    (2025-01) Sukumar, Abisha Nancy
    newline
  • Thumbnail Image
    Item
    TOXIC EFFECTS OF NICKEL SULPHATE ON EMBRYONIC MICE (EXPOSED MALE: NORMAL FEMALE)
    (ASOC for The Advancement Of Zoology-India, 1999-06-01) Pandey, R; Kumar, R; Singh, SP; Srivastava, SP
    Mating between Nickel Sulphate treated male mice and normal female mice resulted in a decreased number of foetus, weight of foetus and length of foetus. But there is no accumulation of Nickel Sulphate in embryonic mice. The number of corpora lutea increased and fertility reduced in female mice. Our aim was to determine male mediated toxic affects of Nickel on embryonic mice.
  • Item
    TANNERY WASTEWATER REMEDIATION COMPETENCE OF METAL TOLERANT BACTERIA AND FUNGI UNDER THE INFLUENCE OF CHEMICALLY MODIFIED WATER HYACINTH BIOCHAR: AN IN VITRO EVALUATION
    (Springer Link, 2023-11-22) Kandasamy, Gajendiran; Ying, Ma; Sabariswaran, Kandasamy; Amal Abdullah, A. Sabour; Maha, Alshiekheid; Arivalagan, Pugazhendhi; Mathiyazhagan, Narayanan
    This study was trying to find a sustainable approach to remediate the tannery wastewater by various treatments sets (set-I to set-VIII: consists of KOH modified biochar, Bacillus cereus, and Aspergillus flavus biomass), and treatment successfulness was determined by phytotoxicity and cytotoxicity studies on potential Vigna unguiculata seedlings and Artemia franciscana larvae, respectively. Three tannery wastewater samples were collected from 3 sites (I, II, and III); among them, the physicochemical properties of site I were beyond the permissible limits containing more volume of harmful heavy metals such as Cr, Cd, Pb, As, Co, Cu, Fe, Zn, and Mn than other sample. The test B. cereus and A. flavus showed remarkable metal tolerance to heavy metals such as Cr, Cd, Pb, As, Co, Cu, Fe, Zn, and Mn at 800 µg mL−1. The bioremediation study results stated that the KOH modified pre-synthesized and characterized water hyacinth biochar with the blend of B. cereus and A. flavus (treatment set-VII) biomass substantially reduced/removed (Cr, Cd, Pd, As, Co, Cu, Fe, Zn, and Mn as 54.75%, 49.52%, 30.49%, 17.53%, 29.07%, 14.75%, 5%, 27.27%, and 9.2%, respectively) the heavy metals from the tannery wastewater. The treatment effectiveness was determined by phytotoxicity and cytotoxicity studies on V. unguiculata seedlings and A. franciscana larvae, respectively. Among various treatment sets, the set-VII demonstrated absence of phytotoxicity and cytotoxicity on V. unguiculata seedlings and A. franciscana larvae, respectively. This clearly shows that the KOH modified biochar with B. cereus and A. flavus biomass can be used to manage and treat tannery wastewater in a sustainable manner.
  • Item
    A REVIEW ON LOW TEMPERATURE COMBUSTION ENGINES: PERFORMANCE, COMBUSTION AND EMISSION CHARACTERISTICS
    (Elsevier, 2019-12) Krishnamoorthi, M; Malayalamurthi, R; Zhixia, He; Sabariswaran, Kandasamy
    Low temperature combustion (LTC) is a recent engine technology that can reduce the oxides of nitrogen (NOx) and soot emissions simultaneously while maintaining higher thermal efficiency. The present review work investigates the performance, emission and combustion characteristics of LTC mode engines. Partially premixed LTC (PPLTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) and reactivity controlled compression ignition (RCCI) modes are researched under LTC mode. In recent decades, different engine strategies have been employed to reduce exhaust emissions and to enhance thermal efficiency. Exhaust gas recirculation, variable valve timing (VVT), advanced fuel injection technologies are adapted to achieve LTC mode in internal combustion (IC) engines to get improved outcomes. This review highlights the properties of fuels, fuel supply systems, valve actuation mechanisms, engine operating conditions and its effects on the engine characteristics. This review provides a perspective plan to the researchers for enhancing the performance, emission and combustion behavior of an engine by using LTC mode with lower NOx and soot emissions. Among LTC mode engines, RCCI mode engine operates well in 60% load, 60% premixed ratio, 35:1 air-fuel ratio and 56% brake thermal efficiency within the combustion phasing control.
  • Item
    IMPROVEMENT OF EMISSION REDUCTION IN NANO ADDITIVE SIMAROUBA GLAUCA BIODIESEL BLENDS
    (Taylor & Francis Online, 2018-06-26) Sabariswaran, Kandasamy; Selvakumar, Sundararaj
    In this paper discussed about the emission profile from nano additive blended biodiesel. It is observed that minimum carbon dioxide was emitted in the presence of zinc oxide blends when compared to B20 and diesel. The hydrocarbon emission for the diesel and B20 was higher than that of the B20ZnO50 and B20ZnO100 blended fuels. The higher oxide of nitrogen emissions was observed with the B20ZnO50 and B20ZnO100 blended fuels at all engine loads when compared to B20 and diesel.
  • Item
    DEVELOPMENT OF PORTABLE COLORIMETER FOR ON-SITE DETERMINATION OF WATER QUALITY IN AQUACULTURE
    (Pigment & Resin Technology, 2022-05-25) Kesavan, Devarayan; Madhan, Kathavarayan; Anand, Theivasigamani; Monikandon, Sukumaran; Sabariswaran, Kandasamy
    This study aims to describe the development of a battery-operated portable colorimeter for on-site determination of water quality in aquaculture.A simple and economical colorimeter is built using light sources of different wavelength and a light-dependent resistor combined with an electrical circuit. The whole system was fabricated as to fit into the pocket or palm for easy handling. The developed portable colorimeter was calibrated for estimation of nitrite. Further, the performance of developed portable colorimeters was compared with the commercially available colorimeter.Three colorimeters with different light sources were developed and calibrated for determination of nitrite in water. Among them, colorimeter with yellow light source exhibited higher potential for determination of nitrite in the range of 0.5–3.5 ppm. Further, the results of the developed colorimeter are comparable with the commercial colorimeter.The portable colorimeter developed in this study exhibits potential for determination of nitrite in aquaculture. Determination of nitrite at low concentrations is important for assessing the quality of culture as well as wastewater in aquaculture industry. The accuracy, portable nature, economy and simple operation of these portable colorimeters offer opportunity for on-site determination of water quality parameters in aquaculture.
  • Item
    A REVIEW ON HYDROTHERMAL LIQUEFACTION OF ALGAL BIOMASS ON PROCESS PARAMETERS, PURIFICATION AND APPLICATIONS
    (Elsevier, 2022-04-01) Sathish Raam, Ravichandran; Chitra Devi, Venkatachalam; Mothil, Sengottian; Sarath, Sekar; Sabariswaran, Kandasamy; Kesav Prasath, Ramasamy Subramanian; Kirubakaran, Purushothaman; Aravindan Lavanya, Chandrasekaran; Mathiyazhagan, Narayanan
    Algae, a potential biomass feedstock with a faster growth rate and capability of greenhouse gas absorption, mitigates the limitations of the first- and second-generation feedstock in bio-oil production. hydrothermal liquefaction (HTL) is known to be an active method capable of producing substantial energy resources. In HTL, biomass undergoes thermal depolymerization in the presence of water, at around 280 °C–350 °C following subcritical and near supercritical conditions to produce chemical compounds such as alkanes, nitrogenates, esters, phenolics, etc. The primary product, “Biocrude/Bio-oil” obtained from the reaction, is identified as the essential fuel source after processing and also as a distinct value-added chemical source, along with biochar and biogas as co-products. This review outlines a range of routes available for thermochemical conversion of the algal biomass. It also provides a better understanding of the reaction mechanism like depolymerization, decomposition, and re-polymerization, operating conditions like temperature, pressure, the quantity of catalyst required, and the solvent used in the process. The review also highlights the yield achieved by altering the aforementioned parameters, comparing and presenting them as a collective result.
  • Item
    ANTIBIOFILM ACTIVITY OF BIOSURFACTANT PRODUCED BY A SPONGE-ASSOCIATED MARINE COBETIA SP. JCG-23
    (Springer Link, 2023-09-22) Govindarajan, Ganesan; Chandrasekar, Balu; Suganthi, Ganesan; Samuel Raj, Babu Arulmani; Sabariswaran, Kandasamy
    Marine symbiotically associated microbes play a vital role and are an excellent source of natural compounds that exert wide biological activities. In this study, we have reported on the identification, characterization, phylogenetic relationship, and anti-biofilm surface-active compound-producing abilities of marine invertebrate sponge-associated Cobetia sp. JCG-23. Among 24 isolates, a total of five strains (JCG2, JCG19, JCG20, JCG22, and JCG23) have active surface molecule producing potential on the emulsification index assay. Interestingly, the potential candidate JCG-23, produces biosurfactants with low surface tension (22 Nm-1) that exert anti-biofilm activity against Pseudomonas aeruginosa PAO1. The isolate was identified as genus Cobetia sp. JCG-23 with 99.1% sequence similarity to Cobetia crustatorum (EU909460) based on 16S rRNA gene sequence analysis. The large-scale production, purification, stability, and characterization of biosurfactant were carried out and its surface activity was determined using the oil drop method. Subsequent spectral analysis such as UV, FT-IR, and GC-MS analysis indicated that the purified biosurfactant was a hydroxyl fatty acid, namely octadecanoic acid (C18H36O2) with a molecular weight of 284 m/z. Furthermore, the effect of antibiofilm activity on the viability of Pseudomonas aeruginosa PAO1 by static ring tube and light and confocal laser scanning microscopy analysis revealed that the octadecanoic acid from Cobetia sp. JCG-23 has strong biofilm dismantle ability against Pseudomonas aeruginosa PAO1. Further characterization of the biosurfactant from the isolate Cobetia sp. JCG-23 can pave the way for developing novel bioactive agents targeting biofilm-forming pathogens on topical and medical devices.
  • Item
    INFLUENCE OF GADOLINIUM DOPED IN NICKEL NANOFERRITES ON STRUCTURAL, OPTICAL, ELECTRICAL, AND MAGNETIC PROPERTIES
    (Elsevier, 2023-02) Bhuvaneshwari V; Lenin N; Shiva C; Kathirvel M; Ragavendran V; Rajeshwari A; Guruprakash B; Vinoth Kumar G.G
    The sonochemical reaction approach was used to make NiGdxFe2-xO4 nanoferrites (x = 0.01, 0.03, 0.05, 0.07, and 0.09). X-ray diffraction (XRD), ultra violet-diffuse reflectance spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, vibrating sample magnetometer, and electrochemical impedance spectroscopy were used to investigate the optical, magnetic, electrical, and structural properties of NiGdxFe2-xO4 nanoferrites. The creation of a cubic spinel structure was confirmed by analyzing the XRD pattern of these NiGdxFe2-xO4 nanoferrites. The average crystallite diameters of the nanoparticles for the compositions x = 0.01, 0.03, 0.05, 0.07, and 0.09 were 57, 53, 48, 45, and 41 nm, respectively. To investigate the dielectric behavior of the produced nanoferrites, an impedance study was performed. The addition of Gd to NiFe2-xO4 nanoparticles increased the dielectric characteristics of the produced nanoferrites, according to characterization experiments. A cation distribution has been proposed for the determination of various important theoretical parameters for these samples. The addition of Gd3+ nanoparticles has shown the ferromagnetic behavior at room temperature confirmed by VSM analysis. A specific correlation between magnetic interaction and lattice strain was observed in Gd3+ substituted nickel ferrite. An increase in Gd concentration in the manufactured nanoferrites resulted in a rise in saturation magnetization and a decrease in coercivity.
  • Item
    INSIGHTS FROM THE MOLECULAR DOCKING ANALYSIS OF COLISTIN WITH THE PMRA PROTEIN MODEL FROM ACINETOBACTER BAUMANNII
    (Pub Med, 2022) Shalini, Ganeshan; Mohammad, Reza Shakibaie; Rajaguru, Rajagopal
    Acinetobacter baumannii (AB) is one of the most common causes of nosocomial infections. Therefore, it is of interest to design and develop drugs against Acinetobacter baumannii. A strain of AB showing MIC 32 µg/ml against colistin was isolated from a hospital environment in Iran. Hence, we document data to glean insights from the molecular docking analysis of colistin with the PmrA protein from this bacterium.