F-KCW-Department Publications

Permanent URI for this communityhttps://dspace.psgrkcw.com/handle/123456789/1

Browse

Author: search.filters.author.Balavijayalakshmi JSubject: search.filters.subject.UV-Vis

Search Results

Now showing 1 - 10 of 14
  • No Thumbnail Available
    Item
    EFFECT OF CALCINATION ON STRUCTURAL AND OPTICAL PROPERTIES OF YTTRIUM OXIDE NANOPARTICLES
    (Bharathiar University, 2020-03-05) Uma B; Balavijayalakshmi J; Shanmugapriya T
    Yttrium oxide has a good electron conducting capacity and easy to mold into different shapes. A novel Yttrium oxide(Y2O3) nanoparticles are synthesized by simple chemical precipitation method. The prepared nanocomposites are characterized by X-Ray diffraction (XRD), Field emission Scanning electron microscopy (FESEM), High Resolution Transmission Electron Microscopy(HRTEM), Energy-dispersive X-ray spectroscopy(EDAX), Fourier-transform infrared spectroscopy (FT-IR), Raman Scattering Spectroscopy and UV-visible (UV-vis) absorption spectroscopy.The X-Ray diffraction analysis showed that the crystallite size of the prepared nanocomposites is found to be 22 nm. The electrochemical activity of the prepared nanocomposites is investigated by cyclic voltammetry(CV) technique. The synthesized nanoparticles can be applied for solar cell applications, electrochemical investigation and supercapacitor applications.
  • No Thumbnail Available
    Item
    SYNTHESIS OF SILVER NANOPARTICLES USING NATURAL REDUCING AGENTS
    (Sastra University, Thanjavur, 2015-01-29) Balavijayalakshmi J; Ramalakshmi V
    Green synthesis of nanoparticle is a novel way to synthesize nanoparticles by using biological sources. It is gaining attention due to its cost effective, eco friendly and large scale production possibilities. Silver nanoparticles are usually synthesized by chemicals which are quite toxic and flammable in nature. This study deals with an environmental friendly and biosynthesis process of antibacterial silver nanoparticles from 2mM aqueous AgNO3 using extract of carica papaya peel, well adorned for its wide availability and medical property. It is observed that the use of ripe carica papaya peel extract makes a fast and convenient method for the synthesis of silver nanoparticles and can reduce silver ions into silver nanoparticles without using any severe conditions. The formation and characterisation of silver nanoparticles (AgNPs) are confirmed by UV-Vis spectroscopy, Scanning electron microscopy (SEM), X-Ray diffraction (XRD), Fourier Transmission infrared spectroscopy (FTIR). Fourier transform infrared spectroscopy analysis revealed that bio molecules are involved in the synthesis and capping of silver nanoparticles. The XRD analysis confirmed that the silver nanoparticles (AgNPs) are crystalline in nature. The morphology of the AgNPs is studied using SEM analysis. The silver nanoparticles synthesized via green route are highly toxic to multidrug resistant human pathogens hence it has a great potential in biomedical application.
  • No Thumbnail Available
    Item
    EFFECT OF CO-AG DOPING ON STRUCTURAL AND OPTICAL PROPERTIES OF ZINC OXIDE NANOPARTICLES
    (PSGR Krishnammal College for women / Advances in Applied Research, 2016) Meena K; Balavijayalakshmi J
    Co-Ag co-doped Zinc oxide nanoparticles were synthesized by chemical co-precipitation method. The synthesized nanoparticles were subjected to X-ray diffraction technique and the average crystallite size was found to be around 29 - 31 nm. The crystallite size increased as the cobalt concentration increased. The optical properties were characterized by UV-Vis and PL spectral analysis. The FT-IR spectra of the samples were recorded and the characteristic absorption bands shifted to lower values as the cobalt concentration increased. The SEM analysis showed sphere shaped particles distributed uniformly. These co-doped (Co,Ag) ZnO nanoparticles may be used in optoelectronics, spintronics, as antibacterial reagents to treat diseases caused by bacteria and fungi and in waste water treatment.
  • No Thumbnail Available
    Item
    MICROWAVE ASSISTED SYNTHESIS OF MOS2/ ZNO/ PANI NANOCOMPOSITES FOR SUPERCAPACITOR APPLICATIONS
    (Department of Mechanical Engineering, NIT, Trichy., 2019-09-09) Krithika T.S; Balavijayalakshmi J
    Supercapacitors are the new generation of energy storage devices alternate to batteries because of excellent power density. Transition metal dichalacogenide nanosheet (MoS2) doped with the zinc oxide and polyanniline nanocomposites influence the transition probabilities and electronic structure. In the present study, the various concentrations of MoS2 / ZnO / PANI nanocomposites are synthesized by microwave assisted method. These nanocomposites are characterized by using X-ray diffraction (XRD), Scanning Electron microscope (SEM), High Resolution Transmission Electron Microscope (HR-TEM), Fourier Transform infrared spectroscopy (FT-IR) UV-visible (UV-Vis) absorption spectroscopy and Raman spectroscopy. The XRD results revealed that the synthesized nanocomposites are crystalline in nature. The average crystallite size of MoS2 / ZnO / PANI nanocomposites is found to be 15 nm. The electrochemical properties of the nanocomposites are studied through the cyclic voltammetry (CV), Electron impedance spectroscopy (EIS) and Galvanostatic charge- discharge (GCD) for the application of supercapacitor as an active electrode material. The MoS2 doped ZnO / PANI nanocomposites shows good cyclic stability .The electrochemical impedance and charge-discharge shows that the MoS2 / ZnO / PANI nanocomposites possess high conductivity and low charge transfer resistance. These results attributes that the synthesized nanocomposites have potential application for energy storage applications.
  • No Thumbnail Available
    Item
    ROLE OF GRAPHENE OXIDE / YTTRIUM OXIDE NANOCOMPOSITES AS A CATHODE FOR NATURAL DYE SENSITIZED SOLAR CELL APPLICATION
    (Department of Mechanical Engineering, NIT, Trichy, 2019-09-09) Shanmugapriya T; Balavijayalakshmi J
    Dye Sensitized Solar Cells are currently the most efficient third-generation solar technology. Natural dye sensitized solar cells are becoming promising candidates for replacing synthetic dyes. Graphene oxide is prepared from natural graphite flakes by modified hummers’ method. A novel Graphene oxide/yttrium oxide (GO/Y2O3) nanocomposites are prepared by chemical precipitation method. The different concentration of (5.1, 5:2 and 5:3) of Yttrium oxide nanoparticles exaggerated on the surface of Graphene oxide nanosheets. The prepared nanocomposites are characterized by X-Ray diffraction (XRD), Scanning electron microscopy (SEM), High Resolution Transmission Electron Microscopy(HRTEM), Energy-dispersive X-ray spectroscopy(EDAX), Fourier-transform infrared spectroscopy (FT-IR), Raman Scattering Spectroscopy and UV-visible (UV-vis) absorption spectroscopy. The X-Ray diffraction analysis shows that the crystallite size of the GO/Y2O3 (5:1, 5:2 and 5:3) is found to be around 23nm, 25.2 nm and 26.92 nm.Field emission scanning electron microscopy (FESEM) reveals that the flake like shape Y2O3nanoparticles are uniformly dispersed on the surface of GO sheets.The UV-Vis studies showed that the prepared Jasminoum Grandiflorum L(JG) dye belong to chlorophyll group with absorption about 4.2 eV respectively. The electrochemical activity of the prepared nanocomposites is investigated by cyclic voltammetry(CV) technique.The power conversion efficiency of prepared sandwich type DSSCs (5:3) is 1.6%
  • No Thumbnail Available
    Item
    INFLUENCE OF IRON ON THE STRUCTURAL AND OPTICAL PROPERTIES OF NICKEL SULPHIDE NANOPARTICLES
    (Royal Book publishers / PSGR Krishnammal College for Women, Coimbatore., 2018-01-03) Sonia D; Balavijayalakshmi J
    Transition metal sulphides exhibit excellent optical, photo electrical and thermoelectric properties. These materials have attracted much attention because of its applications in the field of electroluminescence devices, light emitting displays, cathode material for rechargeable lithium battery, magnetic devices, dye degradation and optical sensors. In the present work, iron doped Nickel sulphide nanopartciles are synthesized using chemical precipitation method. Nickel chloride and Ferric chloride are used as precursors and sodium sulphide as a stabilizing agent. The synthesized nanoparticles are characterized using FT-IR, XRD, SEM, UV-Vis, and PL studies. The presence of function groups are confirmed from FT-IR spectral analysis. The XRD analysis shows the crystalline nature of nanoparticles and the average nano-crystalline size is calculated using Debye – Scherrer formula. The morphology of the samples is analyzed using scanning electron microscope. The optical properties are characterized using UV-Vis spectral analysis and PL study. The synthesized nanoparticles may be used as a catalyst for degradation of organic dyes.
  • No Thumbnail Available
    Item
    STRUCTURAL AND MORPHOLOGICAL INVESTIGATION ON ALUMINIUM DOPED COPPER OXIDE NANOPARTICLES
    (BIT, Sathyamangalam, 2017-08-17) Vidhya Priya P; Balavijayalakshmi J
    The oxides of transition metals are an important class of semiconductors which have a wide range of applications because of its unique properties. Among these, copper oxide nanoparticles are of special interest because of its narrow band gap. Also, Aluminium is the most preferred dopant element because of its small ionic radius and low material cost. Hence in this present work, a novel idea of doping aluminium in copper oxide nanoparticles are carried out using hydrothermal method. The optical and structural properties of aluminium doped copper oxide nanoparticles are studied using UV-Vis and X-ray diffraction analysis. The FT-IR spectral analysis confirms the presence of functional groups in the prepared samples. XRD analysis shows that the synthesized nanoparticles are well crystalline in nature. The morphology of the samples are studied using scanning electron microscope. These nanoparticles may be tested for solar cell applications.
  • No Thumbnail Available
    Item
    ELECTROCHEMICAL BEHAVIOUR OF PREPARED REDUCED GRAPHENE OXIDE/ CHITOSAN NANOCOMPOSITES
    (Sastra University, Thanjavur., 2017-02-27) Yuvashree S; Balavijayalakshmi J
    Recently, efforts have been made to develop technologically feasible graphene-based devices. The development of composite materials based on graphene and natural polymers provides an ideal material in the biomedical field. However, the lack of good mechanical and thermal properties limits its applications. This drawback could be overcome by the reduction of graphene oxide into reduced graphene oxide (RGO). The RGO combined with the polymer helps to increase the conductivity of nanocomposites which thereby enhances the properties of the material to suit commercial applications. This present work is based on the investigation of the electrochemical behaviour of reduced graphene oxide/Chitosan nanocomposite synthesized by chemical reduction method. The synthesized rGO/CS nanocomposites are characterized using ultraviolet–visible (UV-Vis) spectral analysis, Fourier transform infrared (FT-IR) spectral analysis, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analysis. The surface charge as well as stability of the nanocomposites is examined by electrochemical characterization using cyclic voltammetry technique. The analytical responses and the redox mechanisms are evaluated which shows high current response for RGO/Chitosan nanocomposites compared to pure RGO nanosheets. This suggests that RGO/Chitosan nanocomposites have excellent electrochemical behaviour and is further applied for bio sensing applications.
  • No Thumbnail Available
    Item
    GREEN SYNTHESIS OF FE2O3 NANOPARTICLES DERIVED USING BETA VULGARIUS LEAF EXTRACT AS ONE STEP PROCESS
    (Vizhi Chudar Pathippagam/ Anna University, Chennai., 2017-01-06) Ponpoorani A; Balavijayalakshmi J
    Iron oxide nanoparticles have been widely investigated due to their magnetic properties and its potential applications in the area of bioscience and medicine. The Iron oxide has several advantages such as it has better oxidation stability, compatibility in the non aqueous solution, chemical inertness and non toxicity [1]. The adsorption nature of iron oxide has the significant attention in the removal of inorganic chemical pollutants in waste water and underground water [2]. The synthesis of magnetic nanoparticles are done using several physical and chemical methods having drawbacks such as defective surface, low production rate, usage of toxic chemicals and hazardous products during synthesis. Green synthesis technique is the cost effective, eco friendly method and active organic compounds of plant materials used as the reducing agent instead of toxic compounds. The distinct advantages of the green synthesis technique are to overcome the drawbacks of other conventional and timescale biological synthesis techniques. Plant extract acts as the low capping and stabilizing agent. Iron oxide nanoparticles synthesis was done using different plant extracts [3]. In this study, green synthesis route is the one of the most advantageous routes to synthesize Fe2O3 nanoparticles using beet green extract (BETA VULGARIUS) with precursor as ferric chloride solution in a fixed ratio [4]. The iron oxide nanoparticles were synthesized by taking 0.1M of ferric chloride in 25ml of de-ionized water and 25ml of the aqueous solution of leaf extract of BETA VULGARIUS was added in it and colour change was observed. The synthesized iron oxide nanoparticles are characterized using UV-Vis spectroscopy, X-Ray diffraction (XRD), Fourier Transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), High Resolution Transmission Spectroscopy (HR-TEM) and Vibrating Sample Magnetometer (VSM). The UV-Vis spectral analysis of iron oxide nanoparticles from beta vulgarius leaf extract after removing the settled sample from the plant matrix solution. The UV-Vis spectral analysis confirms the formation and stability of iron oxide nanoparticles. The spectrum was recorded between the ranges of 200-800nm. The characteristics peak at 234 nm indicates the presences of Fe2O3 nanoparticles [5]. The optical band gap was found to be 5.299 eV. The FT-IR characterization study is performed to identify the ferric ions and organic stabilizing plant compounds which acts as the reducing agent in ferric chloride ions to form the iron oxide nanoparticles. The FT-IR spectrum of iron oxide nanoparticles from beta vulgaris leaf extract recorded in the range 4000-400cm-1. The absorption bands around 3367cm-1 and 1638cm-1 represents O-H stretching vibrations. The characteristic absorption bands observed around 654 cm-1, 606cm-1 and 562 cm-1 indicates the Fe-O stretching, confirms the presence of iron oxide nanoparticles. These bands correspond to the tetrahedral sites of metal-oxygen bonds and the band around 420 cm-1 corresponds to the octahedral sites of metal-oxygen bonds [6]. FT-IR analysis confirms the bio reduction of ferric chloride into iron oxide nanoparticles.XRD analysis confirms the crystalline nature of iron oxide nanoparticles. The characteristic peaks correspond to (121), (122), (201), (210), (123), (132), (221), (042), (124) and (142) planes. All the diffraction patterns are in good agreement with the JCPDS Card no. 89-7047 corresponding to Fe2O3 in orthorhombic geometry. And the average crystallite size is found to be around 21 nm [7]. The morphological studies of synthesized nanoparticles were studied using the SEM and HR-TEM analysis. The SEM and HR-TEM analysis of different magnifications reveals the shape of iron oxide nanoparticles from beta vulgaris leaf extract. SEM analysis shows the distorted orthorhombic shape of iron oxide nanoparticles. The nanoparticles were agglomerated and coagulated in some places may be due to the beet green extract [8]. The particle size was found in the HR-TEM analysis to be around 21 nm which is good agreement with XRD analysis. The elemental composition of synthesized iron oxide nanoparticles were studied using EDAX spectra. It confirms the presence of Fe-O bond composition. The Selected Area Electron Diffraction pattern of synthesized iron oxide nanoparticles derived from beta vulgaris leaf extract. Each ring corresponds to the characteristic planes of XRD pattern. The magnetic behaviour of Iron oxide nanoparticles is studied using the vibrating sample magnetometer [9]. The saturation magnetization, remanent magnetization and coercivity are found to 788.9E-6 emu, 2.24 E-6 emu and 39.524G respectively.
  • No Thumbnail Available
    Item
    STRUCTURAL AND MORPHOLOGICAL INVESTIGATION ON THE GRAPHENE OXIDE NANOSHEETS FUNCTIONALIZED TRIMETALLIC NANOPARTICLES
    (Vizhi Chudar Pathippagam / Anna University, Chennai, 2017-01-06) Ramalakshmi V; Balavijayalakshmi J
    In recent years, the trimetallic nanoparticles (NPs) are of having great interest because of their novel properties and applications. Trimetallic nanoparticles have improved physicochemical properties compared to their monometallic nanoparticles. Among the other metallic NPs, trimetallic NPs possess scientific and industrial importance because of their unique properties namely, magnetic, optical, electronic, and catalytic for practical applications [1]. In the present paper, the attempt has been made to synthesize trimetallic Au-Ag/Ni nanocomposites on β-cyclodextrin functionalized reduced nano graphene sheets (β-CD-NGS) as the platform. Graphene, a two-dimensional structure consists of sp2 hybridized carbon closely packed honeycomb lattices. It is considered as a basic building block for graphitic materials with all other dimensionalities [2]. It has considerable heed on both the experimental and theoretical fields because of its unique nanostructure and a variety of attracting thermal, mechanical, electrical properties. Based on these remarkable properties of graphene, these graphene nanosheets can be used as an ideal building block for nanocomposites and are broadly applied in many technological fields such as nanophotonics, sensors, catalysis, and supercapacitors [3]. But during the reduction process of graphene oxide (GO) to nano graphene sheets (NGS), NGS tends to agglomerates via Vander Waals interactions, due to the loss of oxygen containing functional groups in GO, and it is difficult for many potential applications. To overcome this problem, the β-Cyclodextrin (β-CD) is introduced into the graphene oxide before the reduction process is fully completed. The introduced β -CD onto the surface of NGS prevents the agglomeration of the NGS and improves the solubility of the β-CD-NGs in water [3]. This new composite have individual properties of two materials, such as large surface area and high conductivity of GO and supramolecular recognition and enrichment capability of β-CD. It is a macrocyclic allied oligosaccharides composed of seven glucose units. It is toroidal in shape with a hydrophobic inner cavity and a hydrophilic exterior which provides water solubility. The characteristic of β-CD facilitates them to selectively bind various organic, inorganic, and biological guest molecules into their cavities to form stable host guest inclusion complexes and also exhibits high molecular selectivity and enantioselectivity. Therefore, β-CD functionalized NGS are used as a platform for the preparation of nanocomposites [4]. In recent years metal nanoparticles (Au, Ag) have been used for many potential applications, because of their high surface to volume ratio and good catalytic activity compared to their respective bulk metals. The noble metals (Au, Pd, Pt etc.) doped with non-noble metals (Fe, Co, Ni etc.) is an admirable approach to intensify the catalytic activity and the sensitivity of nanomaterials [5]. The synthesized nanocomposites are characterized using UV-Vis, FT-IR, XRD, EDX and SEM analysis. Synthesized Pure NGS, β-CD, β-CD-NGS and β-CD-NGS-(Au-Ag/Ni) nanocomposites are characterized using UV-Vis spectroscopy. According to the UV-Vis spectral analysis, the absorption band for pure NGS are obtained around 240 nm and 300 nm for π-π* transition of the atomic C-C bonds and n-π* transitions of aromatic C-C bonds respectively and for β –CD the major peak observed around 260 nm. In the β-CD-NGS spectra, an absorption peak at 260 nm is observed, indicating the successful synthesis of β-CD-NGS. The UV-Vis spectra of β-CD-NGS-(Au-Ag/Ni) nanocomposite confirm the presence of all formed composites [3]. FT-IR spectra of pure NGS, β-CD, β-CD-NGS and β-CD-NGS-(Au-Ag/Ni) nanocomposites are recorded. From the results, the transmission bands of pure NGS obtained around 1100 cm-1, 1600 cm-1 and 3400 cm-1 may correspond to the bending vibrations of coupled C–C/C–O, O–H and O–H stretching vibration respectively. The FT-IR spectra of β-CD-NGS exhibits spectra for β-CD around 940 cm-1, 700 cm-1 and 570 cm-1 may due to the skeletal vibration and pyranose ring vibrations respectively, which is in good agreement with the pure β-CD spectrum. The main absorption peaks of pure NGS are also observed and it confirms the presence of β-CD molecules on the surface of GNS. The FT-IR spectra of β-CD-NGS-(Au-Ag/Ni) nanocomposites also confirm the presence of all the functional groups of synthesized nanocomposites [6]. The crystalline nature of the synthesized nanocomposites is studied using XRD analysis. By observing the sharp crystalline XRD peaks, the formation of pure nanoparticles without any impurities are confirmed .The microstructure of the Pure NGS, β-CD, β-CD-NGS and β-CD-NGS-(Au-Ag/Ni) nanocomposites are investigated by SEM analysis. In the SEM image of β-CD-NGS-(Au-Ag/Ni) nanocomposites, the bright spots are observed, which confirms the formation of trimetallic nanoparticles on CD-NGS [4]. The EDX spectrum of the prepared β-CD-NGS-(Au-Ag/Ni) nanocomposites confirms the presence of the β-CD, NGS, Au, Ag, Ni element in the prepared nanocomposites [7]. The as-synthesized nanocomposites may have many potential applications in removal of dye pollutants and waste water treatment technologies etc.